eviropico
type host vendor Raspberry Pi model Raspberry Pi Pico W / Pico 2 W cpu RP2040 / RP2350 (MicroPython, not Linux) ram 264 KB SRAM / 8 MB flash os Pimoroni MicroPython firmware unplugged hat Pimoroni Enviro+ (BME688, LTR559, mic/SPL, TFT + optional particulate)
A Raspberry Pi Pico (W or Pico 2 W), not a Pi proper — runs MicroPython flashed with Pimoroni's pimoroni-pico firmware, driving a Pimoroni Enviro+ board (BME688 gas/temp/hum/press, LTR559 light, an SPL/graphic-equalizer mic FFT, and a 240×240 TFT).
Reads the Enviro+ sensors, renders to the TFT, and lights the onboard RGB LED red when gas resistance drops below 50%. Buttons A/B toggle the backlight; X/Y switch between sensor readout and graphic-equalizer modes.
Unplugged. Never in the flake — MicroPython on a microcontroller, nothing to declaratively manage. Flashed via Thonny, shared into WSL with usbipd-win. Its code is not in git.
Linked references 2
Fleet
| Host | Purpose | Hardware |
|---|---|---|
| Fleet/eviropico | environment sensor | Pi Pico W, Pimoroni Enviro+ |
Fleet
Fleet/eviropico is unplugged. Its MicroPython code is not in git.